Contactor coil problem of portal crane
發布時間：
2023-02-23
The use of portal cranes, inevitably the following small accidents will certainly occur, as long as we understand the reasons, then it is much simpler to solve, today we will look at the causes of ah portal crane contactor coil power failure.
Portal crane
1, the vibration generated by the car work so that the slide iron and rail combination is not firm, power supply problems, resulting in the main contactor main contact and normally open auxiliary contact disconnected at the same time, the main contactor coil self-locking failure and lead to power failure.
2, poor local contact of the slide iron, resulting in crane travel to a section of the slide rail momentary phase deficiency, if the missing phase happens to be connected to the control line, the main contactor coil power failure, self-locking failure, even if the bridge crane due to inertia slide through the poor contact regained power, the main contactor coil can not be self-absorption, you must press the start button again.
3, the crane lifting heavy objects generated by vibration so that the main contactor does not hold, the main contacts and normally open auxiliary contacts at the same time due to vibration and disconnection, the main contactor coil self-locking failure and power failure.
下一頁：
相關資訊
2018-04-01
飛龍·新飛工 國家電網采購出口埃塞俄比亞
2018-03-26
河南省委書記謝伏瞻蒞臨河南飛龍工程機械制造有限公司調研
2018-03-26
我們有超過20年的起重機制造經驗。
聯系我們
郵箱:
Tel：內貿：135 9876 3988
外貿：131 3758 7588
地址:
河南省蘭考縣產業集聚區未來大道1號
版權所有 ? 河南飛龍工程機械制造有限公司
本網站支持IPV6